6LoWPAN接続-環境整備編-

用意するデバイス

  1. VMWare

  2. Contiki

Download Contiki

Instant Contiki 3.0

https:\/\/sourceforge.net\/projects\/contiki\/files\/Instant%20Contiki\/

これが2.9Gもある。ダウンロードには相当の時間が掛かる。

Run Contiki

  1. downloadしたcontiki以下にある、 Instant\_Contiki\_Ubuntu\_12.04\_32-bit.vmdk をVMWareで起動する
  2. VirtualBoxにUSBを認識させるために [VM VirtualBox Extension Pack](https:\/\/www.virtualbox.org\/wiki\/Downloads) をインストールする
  3. 起動後、「user」というパスワードでログインする

    CC2531 USB Evaluation Kit

CC2531 USB Dongle
Note: The CC2531 USB dongles in the CC2531EMK kit are pre-programmed with the
packet sniffer firmware and can be used for packet sniffing straight away. However,
since the firmware on the dongle is not automatically updated, it is recommended to
program it with the latest firmware. Dongles included in other kits may have to be
programmed. The packet sniffer hex file is located at
<install dir>\bin\general\firmware\sniffer_fw_cc2531.hex
The firmware can be programmed with the SmartRF Flash Programmer tool. To
program the firmware on the dongle, it must be connected to either a SmartRF05EB or
a CC Debugger via the debug connector

http:\/\/www.tij.co.jp\/jp\/lit\/ug\/swru187g\/swru187g.pdf

http:\/\/www.tij.co.jp\/tool\/jp\/packet-sniffer

参考

http:\/\/piratefache.ch\/getting-started-with-ti-6lowpan-sensortag\/ http:\/\/processors.wiki.ti.com\/index.php\/Contiki-6LOWPAN

http:\/\/blog.resens.net\/\/post\/Running-Contiki-on-SensorTag

http:\/\/blog.resens.net\/\/post\/Contiki-6LowPAN-Wireless-Sensor-Network-using-SensorTag

https:\/\/github.com\/soburi\/tbf-somehow-6lowpan\/blob\/master\/4_%2B_6lbr_setup.md

results matching ""

    No results matching ""